{"product_id":"rms900103810","title":"STATOR + KOKUSAN FLYWHEEL + MOSFET + PULLER (RMS900-103810)","description":"\u003cp\u003eIntroducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 \u0026amp; 2011-2020 Tuono V4.\u003c\/p\u003e\u003cp\u003eAnyone who rides or repairs Aprilia’s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in its lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned-up, or shorted stator winding, and often in a failed voltage regulator.\u003c\/p\u003e\u003cp\u003eThe solution was a new flywheel from Kokusan with lower-strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike’s electronic needs and the long-term reliability of the stator and voltage regulator.\u003c\/p\u003e\u003cp\u003eTo prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a completely reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven’t already!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncluded in this kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty Kokusan brand recall-type OEM flywheel\u003c\/li\u003e\n\u003cli\u003eTriple-tested heavy-duty stator\u003c\/li\u003e\n\u003cli\u003eMosfet voltage regulator rectifier\u003c\/li\u003e\n\u003cli\u003eCrankcase cover gasket\u003c\/li\u003e\n\u003cli\u003eFlywheel puller\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKokusan upgrade\/recall type flywheel:\u003c\/strong\u003e Lower-strength magnets for correct stator output, low heat generation, and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to OEM size:\u003c\/strong\u003e Fits precisely in your ride install it and forget it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved epoxy:\u003c\/strong\u003e Uses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-grade steel capping:\u003c\/strong\u003e Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise balancing:\u003c\/strong\u003e Eliminates crankshaft vibrations for longer engine longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShop with confidence:\u003c\/strong\u003e All products are tested. Don't waste time with temporary solutions, and start fixing your ride like a pro!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStator Dimensions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eInterior diameter: 43 mm\u003c\/li\u003e\n\u003cli\u003eExterior diameter: 105 mm\u003c\/li\u003e\n\u003cli\u003eThickness: 13.8 mm\u003c\/li\u003e\n\u003cli\u003eLength of wires stator to grommet: 125 mm\u003c\/li\u003e\n\u003cli\u003eLength of wires grommet to plug: 320 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eOther specifications:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of wires: 3\u003c\/li\u003e\n\u003cli\u003eNumber of plugs: 1\u003c\/li\u003e\n\u003cli\u003eNumber of pins: 3\u003c\/li\u003e\n\u003cli\u003eAlternator:Yellow to Yellow = 0.3 ohms +-20%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFlywheel Dimensions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eExterior Diameter #1: 121 mm\u003c\/li\u003e\n\u003cli\u003eExterior Diameter #2: 119 mm\u003c\/li\u003e\n\u003cli\u003eInterior Diameter: 107 mm\u003c\/li\u003e\n\u003cli\u003eInterior Diameter Center Housing: 19.2 mm\u003c\/li\u003e\n\u003cli\u003eExterior Diameter Center Housing: 34 mm\u003c\/li\u003e\n\u003cli\u003eThickness (exterior): 35.3 mm\u003c\/li\u003e\n\u003cli\u003eThickness (interior): 30.65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage Regulator Dimensions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 80 mm\u003c\/li\u003e\n\u003cli\u003eLength: 110 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 28 mm\u003c\/li\u003e\n\u003cli\u003eWires length: 150 \u0026amp; 400 mm\u003c\/li\u003e\n\u003cli\u003eFixation holes center to center: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eOther specifications:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\n\u003cli\u003eNumber of pins: 7\u003c\/li\u003e\n\u003cli\u003eNumber of wires: 7\u003c\/li\u003e\n\u003cli\u003eMinimum Charging Voltage: 14.5 V +- 0.5 V\u003c\/li\u003e\n\u003cli\u003eMaximum Charging Current: 50 A \/ 500 W\u003c\/li\u003e\n\u003cli\u003eOpen Circuit Voltage: 15 V\u003c\/li\u003e\n\u003cli\u003eOperation Temperature: -20° C to 85° C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eFlywheel Puller Dimensions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e36 mm x 1.5 right-hand male\u003c\/li\u003e\n\u003cli\u003eLength: 60 mm\u003c\/li\u003e\n\u003cli\u003eExterior Diameter: 47 mm\u003c\/li\u003e\n\u003cli\u003eInterior Diameter: 20 mm\u003c\/li\u003e\n\u003cli\u003eExterior Diameter Center Housing: 37 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eThere are two possible kits for the RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with Kokusan flywheels. Please compare our flywheel to your original.\u003c\/p\u003e\u003cp\u003eIf your RSV4 engine number is LOWER than 3413, your motor uses the Mitsubishi flywheel and will need Stator Assembly 857201. Refer to kit \u003cstrong\u003eRMS900104929\u003c\/strong\u003e.\u003c\/p\u003e","brand":"RMSTATOR","offers":[{"title":"Default Title","offer_id":47597533888682,"sku":"RMS900103810","price":839.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8057\/5402\/files\/RMS900103810.jpg?v=1764227099","url":"https:\/\/www.ozriderwarehouse.com.au\/products\/rms900103810","provider":"Oz Rider Warehouse","version":"1.0","type":"link"}